nach oben

Physics of Metals and Metallography

Erschienen in:

01.07.2023 | STRUCTURE, PHASE TRANSFORMATIONS, AND DIFFUSION

The Effect of High-Temperature Thermomechanical Treatment on the Microstructure and Mechanical Properties of Cu–Al–Ni–(B) Alloys with a Thermoelastic Martensitic Transformation

verfasst von: A. E. Svirid, V. G. Pushin, V. V. Makarov, N. N. Kuranova

Erschienen in: Physics of Metals and Metallography | Ausgabe 7/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Polycrystalline boron-alloyed α + β Cu–Al–Ni compositions subjected to high-temperature thermomechanical treatment (HTMT) via forging and rolling are studied for the first time. Optical, scanning, and transmission electron microscopy and X-ray diffraction analysis were used in combination with measurements of tensile mechanical properties to study the peculiarities of the microstructure, phase composition, and mechanical properties of these alloys. The peculiarities of the microstructure and mechanical behavior of alloys differing in their aluminum and boron contents, which were subjected to HTMT, have been determined. The alloys were prepared in the fine-grained state, which determines the increase in the functional strength and plastic characteristics. A schedule of HTMT of bulk Cu–Al–Ni–(B) alloys is proposed.

Vorheriger Artikel The Change in the Radius of a First Coordination Sphere in Amorphous Alloys under Deformation

Nächster Artikel Secondary Phases in MgB2 Superconducting Ceramics

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

H. Warlimont and L. Delaey, “Martensitic transformations in copper-silver and gold based alloys,” Prog. Mater. Sci. 18, 1–157 (1974).

V. A. Likhachev, S. L. Kuz’min, and Z. P. Kamentseva, Shape Memory Effect (Leningrad. Gos. Univ., Leningrad, 1987).

G. V. Kurdyumov and L. G. Khandros, “On the “thermoelastic” equilibrium on martensitic transformations,” Dokl. Akad. Nauk SSSR 66, 211–214 (1949). http://archive.ujp.bitp.kiev.ua/files/journals/53/si/ 53SI20p.pdf.

K. Otsuka, K. Shimizu, Yu. Suzuki, and Yu. Sekiguti, Shape Memory Alloys, Ed. by H. Funakobo (Kyoto, 1984).

P. Sedlák, H. Seiner, M. Landa, V. Novák, P. Šittner, and L. Mañosa, “Elastic constants of bcc austenite and 2H orthorhombic martensite in CuAlNi shape memory alloy,” Acta Mater. 53, 3643–3661 (2005). https://doi.org/10.1016/j.actamat.2005.04.013CrossRef

L. Mañosa, S. Jarque-Farnos, E. Vives, and A. Planes, “Large temperature span and giant refrigerant capacity in elastocaloric Cu–Zn–Al shape memory alloys,” Appl. Phys. Lett. 103, 211904 (2013). https://doi.org/10.1063/1.4832339CrossRef

R. Dasgupta, “A look into Cu-based shape memory alloys: Present scenario and future prospects,” J. Mater. Res. 29, 1681–1698 (2014). https://doi.org/10.1557/jmr.2014.189CrossRef

V. Pushin, S. Prokoshkin, R. Valiev, V. Brailovskii, E. Valiev, A. Volkov, A. Glezer, S. Dobatkin, V. Dudarev, Yu. Zhu, Yu. Zainulin, Yu. Kolobov, V. Kondrat’ev, A. Korolev, A. Korshunov, N. Kourov, N. Kudrevatykh, A. Lotkov, L. Meisner, A. Popov, N. Popov, A. Razov, M. Khusainov, Yu. Chumlyakov, S. Andreev, A. Baturin, S. Belyaev, V. Grishkov, D. Gunderov, A. Dyupin, K. Ivanov, V. Itin, M. Kasymov, O. Kashin, I. Kireeva, A. Kozlov, T. Kuntsevich, N. Kuranova, N. Pushina, E. Ryklina, A. Uksusnikov, I. Khmelevskaya, A. Shelyakov, V. Shklover, E. Shorokhov, and L. I. Yurchenko, Titanium Nickelide Shape Memory Alloys, Vol. 1: Structure, Phase Transitions and Properties (Ural. Otd. Ross. Akad. Nauk, Ekaterinburg, 2006).

V. Pushin, N. Kuranova, E. Marchenkova, and A. Pushin, “Design and development of Ti–Ni, Ni–Mn–Ga and Cu–Al–Ni-based alloys with high and low temperature shape memory effects,” Materials 12, 2616 (2019). https://doi.org/10.3390/ma12162616CrossRef

10.

A. V. Lukyanov, V. G. Pushin, N. N. Kuranova, A. E. Svirid, A. N. Uksusnikov, Yu. M. Ustyugov, and D. V. Gunderov, “Effect of the thermomechanical treatment on structural and phase transformations in Cu–14Al–3Ni shape memory alloy subjected to high-pressure torsion,” Phys. Met. Metallogr. 119, 374–382 (2018). https://doi.org/10.1134/S0031918X18040142CrossRef

11.

A. E. Svirid, A. V. Luk’yanov, V. G. Pushin, E. S. Belosludtseva, N. N. Kuranova, and A. V. Pushin, “Effect of the temperature of isothermal upsetting on the structure and the properties of the shape memory Cu–14 wt % Al–4 wt % Ni alloy,” Phys. Met. Metallogr. 120, 1159–1165 (2019). https://doi.org/10.1134/S0031918X19120159CrossRef

12.

A. E. Svirid, V. G. Pushin, N. N. Kuranova, E. S. Belosludtseva, A. V. Pushin, and A. V. Lukyanov, “The effect of plastification of Cu–14Al–4Ni alloy with the shape memory effect in high-temperature isothermal precipitation,” Tech. Phys. Lett. 46, 118–121 (2020). https://doi.org/10.1134/s1063785020020145CrossRef

13.

A. E. Svirid, A. V. Lukyanov, V. G. Pushin, N. N. Kuranova, V. V. Makarov, A. V. Pushin, and A. N. Uksusnikov, “Application of isothermal upset for megaplastic deformation of Cu–Al–Ni β alloys,” Tech. Phys. 65 (7), 1044–1050 (2020). https://doi.org/10.1134/s1063784220070245CrossRef

14.

A. E. Svirid, V. G. Pushin, N. N. Kuranova, V. V. Makarov, and A. N. Uksusnikov, “The effect of heat treatment on the structure and mechanical properties of nanocrystalline Cu–14Al–3Ni alloy subjected to high-pressure torsion,” Phys. Met. Metallogr. 122, 883–890 (2021). https://doi.org/10.1134/s0031918x21090131CrossRef

15.

V. Pushin, N. Kuranova, A. Svirid, A. Uksusnikov, and Yu. Ustyugov, “Design and development of high-strength and ductile ternary and multicomponent eutectoid Cu-based shape memory alloys: Problems and perspectives,” Metals 12, 1289 (2022). https://doi.org/10.3390/met12081289CrossRef

16.

A. E. Svirid, N. N. Kuranova, V. V. Makarov, and V. G. Pushin, “The effect of boron addition on the structure and mechanical properties of Cu–Al–Ni–B alloys with a thermoelastic martensitic transformation,” Phys. Met. Metallogr. 124, 504–513 (2023). https://doi.org/10.1134/S0031918X23600549CrossRef

17.

S. N. Saud, E. Hamzah, T. Abubakar, and H. R. Bakh-sheshi-Rad, “Correlation of microstructural and corrosion characteristics of quaternary shape memory alloys Cu–Al–Ni–X (X = Mn or Ti),” Trans. Nonferrous Met. Soc. China 25, 1158–1170 (2015). https://doi.org/10.1016/s1003-6326(15)63711-6CrossRef

18.

G. Lojen, I. Anžel, A. Kneissl, A. Križman, E. Unterweger, B. Kosec, and M. Bizjak, “Microstructure of rapidly solidified Cu–Al–Ni shape memory alloy ribbons,” J. Mater. Process. Technol. 162-163, 220–229 (2005). https://doi.org/10.1016/j.jmatprotec.2005.02.196CrossRef

19.

F. C. Lovey, A. M. Condó, J. Guimpel, and M. J. Yacamán, “Shape memory effect in thin films of a Cu–Al–Ni alloy,” Mater. Sci. Eng., A 481–482, 426–430 (2008). https://doi.org/10.1016/j.msea.2007.01.175CrossRef

20.

Z. Li, Z. Pan, N. Tang, Y. Jiang, N. Liu, M. Fang, and F. Zheng, “Cu–Al–Ni–Mn shape memory alloy processed by mechanical alloying and powder metallurgy,” Mater. Sci. Eng., A 417, 225–229 (2006). https://doi.org/10.1016/j.msea.2005.10.051CrossRef

21.

K. Mukunthan and L. C. Brown, “Preparation and properties of fine grain β-CuAlNi strain-memory alloys,” Metall. Trans. A 19, 2921–2929 (1988). https://doi.org/10.1007/bf02647718CrossRef

22.

Z. Wang, X. Liu, and J. Xie, “Effects of solidification parameters on microstructure and mechanical properties of continuous columnar-grained Cu–Al–Ni alloy,” Prog. Nat. Sci.: Mater. Int. 21, 368–374 (2011). https://doi.org/10.1016/s1002-0071(12)60071-9CrossRef

23.

Y. S. Sun, G. W. Lorimer, and N. Ridley, “Microstructure and its development in Cu–Al–Ni alloys,” Metall. Trans. A 21, 575–588 (1990). https://doi.org/10.1007/bf02671930CrossRef

Titel: The Effect of High-Temperature Thermomechanical Treatment on the Microstructure and Mechanical Properties of Cu–Al–Ni–(B) Alloys with a Thermoelastic Martensitic Transformation
verfasst von: A. E. Svirid
V. G. Pushin
V. V. Makarov
N. N. Kuranova
Publikationsdatum: 01.07.2023
Verlag: Pleiades Publishing
Erschienen in: Physics of Metals and Metallography / Ausgabe 7/2023
Print ISSN: 0031-918X
Elektronische ISSN: 1555-6190
DOI: https://doi.org/10.1134/S0031918X23600938

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 7/2023

Influence of High Content of Sodium Doping in Bi(Pb)2212 Superconductors

Martensitic Transformation and the Electrical and Magnetic Properties of Ni51 – хMn36 + хSn13 (0 ≤ х ≤ 4) Alloys

Simulation of the Three-Component Potts Model on a Hexagonal Lattice by the Monte Carlo Method

Magnetic Phase Transitions in Ultrathin YFeO3 Films According to Synchrotron Mössbauer Reflectometry Data

A System of Josephson Vortices in a Layered Electron-Doped Nd2 – xCexCuO4 Superconductor

The Structure and Mechanical Properties of Rolled Sheets of the Multicomponent Al–2.5Ca–2.5Mg Alloy Doped with Scandium and Zirconium