nach oben

Physics of Metals and Metallography

Erschienen in:

29.12.2023 | STRUCTURE, PHASE TRANSFORMATIONS, AND DIFFUSION

Study on the Micro-Texture and Anisotropy of a Cold-Rolled and Intercritically Annealed DP800 Steel

verfasst von: H. Ashrafi, S. E. Aghili

Erschienen in: Physics of Metals and Metallography | Ausgabe 13/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The aim of this study was to investigate the micro-texture and plastic anisotropy of a dual phase steel. A DP800 steel was produced by cold rolling and intercritical annealing of a low carbon steel. Micro-texture analysis on the DP800 steel by means of electron backscatter diffraction revealed that a high orientation density exists along the α and γ fibers. However, the overall texture intensity was not significant. Tensile testing of the DP800 steel at different angles to the rolling direction demonstrated a very low dependency of tensile properties and work hardening behavior to the loading direction. Nevertheless, the r-value showed some directionality with a mean value of 0.851, suggesting a substantial anisotropy for the studied DP800 steel.

Vorheriger Artikel Evaluating the Spatial and Size Distributions of Flat Precipitates in Diffusion-Controlled Precipitation Processes

Nächster Artikel Wear Performances of Hypereutectoid P/M Steels Subjected to Different Heat Treatments

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

M. Nouroozi, H. Mirzadeh, and M. Zamani, “Effect of microstructural refinement and intercritical annealing time on mechanical properties of high-formability dual phase steel,” Mater. Sci. Eng., A 736, 22–26 (2018). https://doi.org/10.1016/j.msea.2018.08.088CrossRef

H. Ashrafi, M. Shamanian, R. Emadi, and E. Ghassemali, “Void formation and plastic deformation mechanism of a cold-rolled dual-phase steel during tension,” Acta Metall. Sin. (Engl. Lett.) 33, 299–306 (2020). https://doi.org/10.1007/s40195-019-00967-3

A. A. Bryukhanov, G. Gerstein, N. A. Volchok, Z. A. Bryukhanova, and F. Nürnberger, “Effect of low-temperature annealings on the change in the level of microdamage of sheets of the dual DP-600 steel,” Phys. Met. Metallogr. 120, 506–512 (2019). https://doi.org/10.1134/s0031918x19020029ADSCrossRef

C. Rajarajan, P. Sivaraj, and V. Balasubramanian, “Role of welding current on mechanical properties and microstructural characteristics of resistance spot welded dual phase steel joints,” Phys. Met. Metallogr. 121, 1447–1454 (2020). https://doi.org/10.1134/s0031918x20140136ADSCrossRef

A. Ghaheri, A. Shafyei, and M. Honarmand, “Effects of inter-critical temperatures on martensite morphology, volume fraction and mechanical properties of dual-phase steels obtained from direct and continuous annealing cycles,” Mater. Des. (1980-2015) 62, 305–319 (2014). https://doi.org/10.1016/j.matdes.2014.04.073

H. Ashrafi, M. Shamanian, R. Emadi, and N. Saeidi, “A novel and simple technique for development of dual phase steels with excellent ductility,” Mater. Sci. Eng., A 680, 197–202 (2017). https://doi.org/10.1016/j.msea.2016.10.098CrossRef

L. Geng and R. H. Wagoner, “Role of plastic anisotropy and its evolution on springback,” Int. J. Mech. Sci. 44, 123–148 (2002). https://doi.org/10.1016/s0020-7403(01)00085-6CrossRef

D. Banabic, F. Barlat, O. Cazacu, and T. Kuwabara, “Advances in anisotropy and formability,” Int. J. Mater. Form. 3, 165–189 (2010). https://doi.org/10.1007/s12289-010-0992-9CrossRef

K.-M. Lee, M.-Yo. Huh, S. Park, and O. Engler, “Effect of texture components on the lankford parameters in ferritic stainless steel sheets,” ISIJ Int. 52, 522–529 (2012). https://doi.org/10.2355/isijinternational.52.522CrossRef

10.

D. D. Tjahjanto, P. Eisenlohr, and F. Roters, “Multiscale deep drawing analysis of dual-phase steels using grain cluster-based RGC scheme,” Modell. Simul. Mater. Sci. Eng. 23, 045005 (2015). https://doi.org/10.1088/0965-0393/23/4/045005ADSCrossRef

11.

F. Z. Xia, H. B. Sun, and H. G. Wei, “Rolling textures in BCC metals: A biaxial stress texture theory and experiments,” Phys. Met. Metallogr. 122, 710–717 (2021). https://doi.org/10.1134/s0031918x21070115ADSCrossRef

12.

H. Ashrafi, M. Shamanian, R. Emadi, M. Sanayei, F. Farhadi, and J. Szpunar, “Characterization of microstructure and microtexture in a cold-rolled and intercritically annealed dual-phase steel,” J. Mater. Eng. Perform. 30, 7306–7313 (2021). https://doi.org/10.1007/s11665-021-05947-2CrossRef

13.

G.-J. Oh, K.-M. Lee, M.-Yo. Huh, J. Park, S. H. Park, and O. Engler, “Effect of r-value and texture on plastic deformation and necking behavior in interstitial-free steel sheets,” Met. Mater. Int. 23, 26–34 (2017). https://doi.org/10.1007/s12540-017-6375-8CrossRef

14.

Yo. Yazawa, M. Muraki, Ya. Kato, and O. Furukimi, “Effect of chromium content on relationship between r-value and {111} recrystallization texture in ferritic steel,” ISIJ Int. 43, 1647–1651 (2003). https://doi.org/10.2355/isijinternational.43.1647CrossRef

15.

ASTM E112: Standard Test Methods for Determining Average Grain Size,” in Annual Book of ASTM Standards (2013).

16.

ASTM E562: Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count,” in Annual Book of ASTM Standards (2019).

17.

B. Beausir and J. Fundenberger, Analysis Tools for Electron and X-ray diffraction, ATEX-Software, www.atex-software.eu (Université de Lorraine, Metz, 2017).

18.

W. Huang and M. Hillert, “The role of grain corners in nucleation,” Metall. Mater. Trans. A 27, 480–483 (1996). https://doi.org/10.1007/bf02648428CrossRef

19.

M. Eskandari, M. A. Mohtadi-Bonab, and J. A. Szpunar, “Evolution of the microstructure and texture of X70 pipeline steel during cold-rolling and annealing treatments,” Mater. Des. 90, 618–627 (2016). https://doi.org/10.1016/j.matdes.2015.11.015CrossRef

20.

X. Zhang, T. Liu, X. Liu, Yo. Li, and H. Zhang, “Effect of P addition on texture evolution of Ti + V-bearing ultra-low carbon bake hardening steel,” Mater. Sci. Eng., A 682, 629–635 (2017). https://doi.org/10.1016/j.msea.2016.11.100CrossRef

21.

C. L. Xie and E. Nakamachi, “Investigations of the formability of BCC steel sheets by using crystalline plasticity finite element analysis,” Mater. Des. 23, 59–68 (2002). https://doi.org/10.1016/s0261-3069(01)00043-7CrossRef

22.

H. Mecking and U. F. Kocks, “Kinetics of flow and strain-hardening,” Acta Metall. 29, 1865–1875 (1981). https://doi.org/10.1016/0001-6160(81)90112-7CrossRef

23.

H. Ashrafi, M. Shamanian, R. Emadi, and N. Saeidi, “Correlation of tensile properties and strain hardening behavior with martensite volume fraction in dual-phase steels,” Trans. Indian Inst. Met. 70, 1575–1584 (2017). https://doi.org/10.1007/s12666-016-0955-zCrossRef

24.

H. Ashrafi, S. Sadeghzade, R. Emadi, and M. Shamanian, “Influence of heat treatment schedule on the tensile properties and wear behavior of dual phase steels,” Steel Res. Int. 88, 1600213 (2017). https://doi.org/10.1002/srin.201600213CrossRef

25.

I. P. Widiantara, H. W. Yang, M. J. Kim, and Yo. G. Ko, “Plastic anisotropy calculation of severely-deformed Al-Mg-Si alloy considering texture changes in electron backscatter diffraction,” J. Mater. Sci. Technol. 35, 1439–1443 (2019). https://doi.org/10.1016/j.jmst.2019.03.022CrossRef

26.

M. Tada, Yu. Nakagawa, and K. Kojima, “Effect of annealing temperature and coiling temperature on r-value of Nb and B-added extra low-carbon steel,” ISIJ Int. 58, 970–977 (2018). https://doi.org/10.2355/isijinternational.isijint-2017-645CrossRef

27.

H. Yan, H. Bi, X. Li, and Z. Xu, “Effect of two-step cold rolling and annealing on texture, grain boundary character distribution and r-value of Nb + Ti stabilized ferritic stainless steel,” Mater. Charact. 60, 65–68 (2009). https://doi.org/10.1016/j.matchar.2008.05.006CrossRef

28.

J. Huh, H. Huh, and C. S. Lee, “Effect of strain rate on plastic anisotropy of advanced high strength steel sheets,” Int. J. Plast. 44, 23–46 (2013). https://doi.org/10.1016/j.ijplas.2012.11.012CrossRef

29.

S. Panich, F. Barlat, V. Uthaisangsuk, S. Suranuntchai, and S. Jirathearanat, “Experimental and theoretical formability analysis using strain and stress based forming limit diagram for advanced high strength steels,” Mater. Des. 51, 756–766 (2013). https://doi.org/10.1016/j.matdes.2013.04.080CrossRef

Titel: Study on the Micro-Texture and Anisotropy of a Cold-Rolled and Intercritically Annealed DP800 Steel
verfasst von: H. Ashrafi
S. E. Aghili
Publikationsdatum: 29.12.2023
Verlag: Pleiades Publishing
Erschienen in: Physics of Metals and Metallography / Ausgabe 13/2023
Print ISSN: 0031-918X
Elektronische ISSN: 1555-6190
DOI: https://doi.org/10.1134/S0031918X22601081

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 13/2023

Investigation of the Effects of Sandblasting, Acid Etching, and Anodizing Parameters in the SLA + Anodizing on the Surface Treatment of Titanium Dental Implant Fixtures

Effect of Phase Formation on Mechanical Properties of the Joint AA6061 to AA2024 by TLP

Wear Performances of Hypereutectoid P/M Steels Subjected to Different Heat Treatments

Microstructural Evolution and Mechanical Behavior of SP-700Ti Alloy during Superplastic Deformation

The Effect of Grit Blasting on Surface Roughness and Hardness of Magnesium Alloy AZ31B: A Statistical Study

Influence of Friction Stir Welding Speed on Barkhausen Noise Emission from Steel