nach oben

Erschienen in:

2024 | OriginalPaper | Buchkapitel

Numerical Approaches for the Study of the Bond Behavior of FRP/FRCM Strengthening Systems Externally Applied to Curved Masonry Structures

verfasst von : Ernesto Grande, Tommaso Rotunno, Mario Fagone, Gabriele Milani

Erschienen in: Proceedings of the International Conference of Steel and Composite for Engineering Structures

Verlag: Springer Nature Switzerland

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This document presents an overview of the studies recently performed by the Authors regarding the numerical simulation of the bond behavior of Fiber Reinforced Polymer (FRP) and Fiber Reinforced Cementitious Matrix (FRCM) strengthening systems in case of applications to curved masonry structures. In the paper are indeed presented and compared among them the different numerical approaches carried out by the Authors and validated with respect to experimental tests. The numerical approaches concern both sophisticated and simplified Finite Element models and, moreover, analytical procedures. The comparison among them allows for underlining important issues to account for numerically analyzing the complex phenomena characterizing the interaction between FRP/FRCM strengthening systems and masonry substrate in case of curved structures. In particular, it is emphasized the influence of stresses acting normal to the substrate at the interface between strengthening and masonry in case of FRP, and between strengthening and matrix in case of FRCM, on the bond mechanism.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Simple Truss Finite Element to Model FRCM Strengthened Specimens in Single Lap Shear Tests

Nächstes Kapitel A Numerical Model for FRCM Reinforced System Based on Bisection Procedure

Bellini, A., Mazzotti, C.: A review on the bond behavior of FRP composites applied on masonry substrates. RILEM Tech. Lett. 2, 74–82 (2017). https://doi.org/10.21809/rilemtechlett.2017.40

de Felice, G., et al.: Mortar-based systems for externally bonded strengthening of masonry. Mater. Struct. 47(12), 2021–2037 (2014). https://doi.org/10.1617/s11527-014-0360-1CrossRef

Misseri, G., Stipo, G., Rovero, L.: Bond behaviour of PBO FRCM on curved masonry substrates. In: Ilki, A., Ispir, M., Inci, P. (eds.) 10th International Conference on FRP Composites in Civil Engineering, pp. 2060–2072. Springer International Publishing, Cham (2022)CrossRef

Rotunno, T., Fagone, M., Grande, E., Milani, G.: FRCM-to-masonry bonding behaviour in the case of curved surfaces: experimental investigation. Compos. Struct. 313, 116913 (2023). https://doi.org/10.1016/j.compstruct.2023.116913CrossRef

Rotunno, T., Fagone, M., Bertolesi, E., Grande, E., Milani, G.: Curved masonry pillars reinforced with anchored CFRP sheets: an experimental analysis. Compos. Part B Eng. 174, 107008 (2019). https://doi.org/10.1016/j.compositesb.2019.107008CrossRef

Fabbrocino, F., Formisano, A., Grande, E., Milani, G.: Bond mechanism of FRPs externally applied to curved masonry structures: experimental outcomes and numerical modeling. Key Eng. Mater. 817, 105–111 (2019)CrossRef

Basilio, I., Fedele, R., Lourenço, P.B., Milani, G.: Assessment of curved FRP-reinforced masonry prisms: experiments and modeling. Constr Build Mater 51, 492–505 (2014).https://doi.org/10.1016/j.conbuildmat.2013.11.011

Grande, E., Milani, G.: Modeling of FRP-strengthened curved masonry specimens and proposal of a simple design formula. Compos. Struct. 158, 281–290 (2016). https://doi.org/10.1016/j.compstruct.2016.09.017CrossRef

Bertolesi, E., Milani, G., Fagone, M., Rotunno, T., Grande, E.: Heterogeneous FE model for single lap shear tests on FRP reinforced masonry curved pillars with spike anchors. Constr. Build. Mater. 258, 119629 (2020). https://doi.org/10.1016/j.conbuildmat.2020.119629CrossRef

10.

Grande, E., Milani, G.: Modeling of FRCM strengthening systems externally applied on curved masonry substrates. Eng. Struct. 233, 111895 (2021). https://doi.org/10.1016/J.ENGSTRUCT.2021.111895CrossRef

11.

Grande, E., Milani, G., Formisano, A., Ghiassi, B., Fabbrocino, F.: Bond behaviour of FRP strengthening applied on curved masonry substrates: numerical study. Int. J. Mason. Res. Innov. 5, 303–320 (2020). https://doi.org/10.1504/IJMRI.2020.107980CrossRef

12.

Castellano, A., Fraddosio, A., Oliveira, D.V., Piccioni, M.D., Ricci, E., Sacco, E.: An effective numerical modelling strategy for FRCM strengthened curved masonry structures. Eng. Struct. 274, 115116 (2023). https://doi.org/10.1016/J.ENGSTRUCT.2022.115116CrossRef

13.

Bertolesi, E., Milani, G., Fagone, M., Rotunno, T., Grande, E.: Micro-mechanical FE numerical model for masonry curved pillars reinforced with FRP strips subjected to single lap shear tests. Compos. Struct. 201, 916–931 (2018). https://doi.org/10.1016/j.compstruct.2018.06.111CrossRef

14.

Milani, G., Fagone, M., Rotunno, T., Grande, E., Bertolesi, E.: Development of an interface numerical model for C-FRPs applied on flat and curved masonry pillars. Compos. Struct. 241, 112074 (2020). https://doi.org/10.1016/j.compstruct.2020.112074CrossRef

15.

Bertolesi, E., Milani, G., Grande, E., Fagone, M., Rotunno, T.: Delamination of FRP reinforced curved masonry pillars: Experimentation and advanced numerical analyses. In: AIP Conference Proceedings (2018)

16.

Malena, M.: Closed-form solution to the debonding of mortar based composites on curved substrates. Compos. Part B Eng. 139, 249–258 (2018). https://doi.org/10.1016/J.COMPOSITESB.2017.11.044CrossRef

17.

Grande, E., Fagone, M., Rotunno, T., Bertolesi, E., Milani, G.: Coupled interface-based modelling approach for the numerical analysis of curved masonry specimens strengthened by CFRP. Compos. Struct. 200, 498–506 (2018). https://doi.org/10.1016/j.compstruct.2018.05.118CrossRef

18.

Grande, E., Bertolesi, E., Milani, G., Rotunno, T., Fagone, M.: Curved masonry supports strengthened with TRM materials: advanced Fe modelling, p. 080006 (2022)

19.

Malena, M., de Felice, G.: Debonding of composites on a curved masonry substrate: experimental results and analytical formulation. Compos. Struct. 112, 194–206 (2014). https://doi.org/10.1016/j.compstruct.2014.02.004CrossRef

20.

Grande, E., Fagone, M., Rotunno, T., Milani, G.: Modeling of shear-lap tests of flat and curved masonry specimens strengthened by FRCM. Structures 52, 437–448 (2023). https://doi.org/10.1016/j.istruc.2023.04.014CrossRef

21.

Khatir, A., Capozucca, R., Magagnini, E., Khatir, S., Bettucci, E.: Structural health monitoring for RC beam based on RBF neural network using experimental modal analysis. In: Capozucca, R., Khatir, S., Milani, G. (eds.) Proceedings of the International Conference of Steel and Composite for Engineering Structures. ICSCES 2022. LNCE, vol. 317, pp. 82–92. Springer, Cham (2023). https://doi.org/10.1007/978-3-031-24041-6_7

22.

Capozucca, R., Khatir, A., Magagnini, E.: Experiences on anchorage systems for FRP rods. In: Capozucca, R., Khatir, S., Milani, G. (eds.) Proceedings of the International Conference of Steel and Composite for Engineering Structures. ICSCES 2022. LNCE, vol 317, pp. 48–58. Springer, Cham (2023). https://doi.org/10.1007/978-3-031-24041-6_4

23.

Bettucci, E., Capozucca, R., Khatir, A., Khatir, S., Magagnini, E.: Concrete plates reinforced with embedded CFRP rods and carbon/steel strips. In: Capozucca, R., Khatir, S., Milani, G. (eds.) Proceedings of the International Conference of Steel and Composite for Engineering Structures. ICSCES 2022. Lecture Notes in Civil Engineering, vol 317, pp. 70–81. Springer, Cham (2023). https://doi.org/10.1007/978-3-031-24041-6_6

24.

Khatir, A., Tehami, M.: Finite element analysis of local buckling of steel-concrete continuous composite beams. In: Proceeding of the 2015 congress on Advanced in Structural Engineering and Mechanics (ASEM15). https://doi.org/10.13140/RG.2.1.2107.5606

25.

Khatir, A., Tehami, M., Khatir, S., Abdel Wahab, M.: republished paper. multiple damage detection and localization in beam-like and complex structures using co-ordinate modal assurance criterion combined with firefly and genetic algorithms. J. Vibroeng. 20(1), 832–842 (2018). https://doi.org/10.21595/jve.2016.19719

26.

Grande, E., Fagone, M., Rotunno, T., Bertolesi, E., Milani, G.: Modelling of the bond behaviour of curved masonry specimens strengthened by CFRP with anchor spikes. Compos. Part B Eng. 171, 235–245 (2019). https://doi.org/10.1016/j.compositesb.2019.04.027CrossRef

27.

Bertolesi, E., Milani, G., Grande, E., Fagone, M., Rotunno, T.: Numerical analysis of the bond behavior of FRP applied to masonry curved substrates with anchor spikes. InCarcaterra, A., Paolone, A., Graziani, G. (eds) Proceedings of XXIV AIMETA Conference 2019. AIMETA 2019. LNME, pp2149–2161. Springer, Cham (2020). https://doi.org/10.1007/978-3-030-41057-5_171

28.

Grande, E., Milani, G.: Interface modeling approach for the study of the bond behavior of FRCM strengthening systems. Compos Part B Eng. 141, 221–233 (2018)https://doi.org/10.1016/j.compositesb.2017.12.052

29.

Grande, E., Milani, G.: Numerical simulation of the tensile behavior of FRCM strengthening systems. Compos. Part B Eng. 189, 107886 (2020). https://doi.org/10.1016/j.compositesb.2020.107886CrossRef

30.

Achouri, F., Khatir, A., Smahi, Z., et al.: Structural health monitoring of beam model based on swarm intelligence-based algorithms and neural networks employing FRF. J. Braz. Soc. Mech. Sci. Eng. 45, 621 (2023). https://doi.org/10.1007/s40430-023-04525-yCrossRef

31.

Khatir, A., et al.: A new hybrid PSO-YUKI for double cracks identification in CFRP cantilever beam. Compos. Struct. 311, 116803 (2023)CrossRef

32.

Rotunno, T., Fagone, M., Bertolesi, E., Grande, E., Milani, G.: Single lap shear tests of masonry curved pillars externally strengthened by CFRP strips. Compos. Struct. 200, 434–448 (2018). https://doi.org/10.1016/j.compstruct.2018.05.097CrossRef

33.

The Mathworks, Inc. MATLAB, Version 9.0 2016 (2016) MATLAB - MathWorks - MATLAB. www.mathworks.com/products/matlab

34.

Dassault Systèmes (2014) ABAQUS 6.14 Getting Started with Abaqus: Interactive Edition. ABAQUS 614 Get Started

35.

Milani, G., Grande, E., Rotunno, T., Fagone, M.: Semi-analytical approach for curved masonry pillars reinforced with FRCM. under Rev (2023)

36.

Pari, M., Swart, W., van Gijzen, M.B., Hendriks, M.A.N., Rots, J.G.: Two solution strategies to improve the computational performance of sequentially linear analysis for quasi-brittle structures. Int. J. Numer. Methods Eng. 121, 2128–2146 (2020). https://doi.org/10.1002/nme.6302MathSciNetCrossRef

37.

Yu, C., Hoogenboom, P.C.J., Rots, J.G.: Incremental sequentially linear analysis to control failure for quasi-brittle materials and structures including non-proportional loading. Eng. Fract. Mech. 202, 332–349 (2018). https://doi.org/10.1016/j.engfracmech.2018.07.036CrossRef

38.

Milani, G.: Semi-analytical mechanical model for FRCM-to-substrate shear bond tests. Compos. Part B Eng. 266, 110983 (2023). https://doi.org/10.1016/j.compositesb.2023.110983CrossRef

Titel: Numerical Approaches for the Study of the Bond Behavior of FRP/FRCM Strengthening Systems Externally Applied to Curved Masonry Structures
verfasst von: Ernesto Grande
Tommaso Rotunno
Mario Fagone
Gabriele Milani
Verlag: Springer Nature Switzerland
Buch: Proceedings of the International Conference of Steel and Composite for Engineering Structures
Print ISBN: 978-3-031-57223-4

Electronic ISBN: 978-3-031-57224-1

Copyright-Jahr: 2024
DOI: https://doi.org/10.1007/978-3-031-57224-1_2

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partner

Marktübersichten