nach oben

Erschienen in:

2024 | OriginalPaper | Buchkapitel

From Design to Procurement of Tokamak Mechanical Structures

verfasst von : Andrea Zoppoli, Mauro Dalla Palma, Giuseppe Di Gironimo

Erschienen in: Design Tools and Methods in Industrial Engineering III

Verlag: Springer Nature Switzerland

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Nuclear fusion facilities, as tokamaks, are very complex devices, due to the harsh environmental conditions required to maintain the plasma advance confinement scenarios and the deuterium-tritium fusion reaction (huge temperatures, nuclear radiation, extreme electromagnetic loads). Therefore, several specific concerns shall be considered during the design process of a tokamak, and appropriate solutions shall be designed and provided. These concerns are treated in this paper and some of their possible solutions are explained. This is done following the flow of good practice design process, focusing on each stage from the material selection to the component procurement.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Fusion Energy: Towards Feasible Power Plant Designs

Nächstes Kapitel Structural Response of DEMO Divertor Under Electromagnetic Loading

Ioki, K., et al.: Design finalization and material qualification towards procurement of the ITER vacuum vessel. J. Nucl. Mater. 417(1–3), 860–865 (2011)CrossRef

Swami, H.L., Danani, C., Shaw, A.K.: Activation characteristics of candidate structural materials for a near-term Indian fusion reactor and the impact of their impurities on design considerations. Plasma Sci. Technol 20(6), 065602 (2018)CrossRef

Kalinin, G., et al.: ITER R&D: vacuum vessel and in-vessel components: materials development and test. Fusion Eng. Des. 55(2–3), 231–246 (2001)CrossRef

Knaster, J., Moeslang, A., Muroga, T.: Materials research for fusion. Nat. Phys. 12(5), 424–434 (2016)CrossRef

Maheshwari, A., et al.: Role of outgassing of ITER vacuum vessel in-wall shielding materials in leak detection of ITER vacuum vessel. In: Journal of Physics: Conference Series, vol. 823, no. 1, p. 012054. IOP Publishing (2017)

Berman, A.: Water vapor in vacuum systems. Vacuum 47(4), 327–332 (1996)CrossRef

Avdiaj, S., Erjavec, B.: Outgassing of hydrogen from a stainless steel vacuum chamber. Mater. Tehnol 46(2), 161–167 (2012)

Pearce, R.J.H., et al.: ITER relevant outgassing and leakage from different types of in-vessel cabling. Fusion Eng. Des. 82(5–14), 1294–1300 (2007)CrossRef

Holtrop, K.L., Hansink, M., Kellman, A.G.: Outgassing tests on materials used in the DIII–D magnetic fusion tokamak. J. Vac. Sci. Technol., A: Vac., Surf. Films 17(4), 2064–2068 (1999)CrossRef

10.

Möller, S., et al.: Dynamic outgassing of deuterium, helium and nitrogen from plasma-facing materials under DEMO relevant conditions. Nucl. Fusion 57(1), 016020 (2016)CrossRef

11.

Wille, G.W., Slattery, K.T., Driemeyer, D.E., Morgan, G.D.: Development of 316L (N)-IG stainless steel fabrication approaches for ITER divertor and limiter applications. Fusion Eng. Des. 39, 499–504 (1998)CrossRef

12.

Ran, H., et al.: The design and manufacturing of HL-2M vacuum vessel. Fusion Sci. Technol. 77(7–8), 549–556 (2021)CrossRef

13.

Aubert, P., Tavassoli, F., Rieth, M., Diegele, E., Poitevin, Y.: Review of candidate welding processes of RAFM steels for ITER test blanket modules and DEMO. J. Nucl. Mater. 417(1–3), 43–50 (2011)CrossRef

14.

Kaguchi, H., et al. Electromagnetic and structural analysis of thin-double-wall vacuum vessel with D-shape cross section of JT-60U. In: IEEE Thirteenth Symposium on Fusion Engineering, pp. 368–371. IEEE (1989)

15.

Liu, Z., et al.: R&D achievements for vacuum vessel towards CFETR construction. Nucl. Fusion 60(12), 126024 (2020)CrossRef

16.

Wang, X., et al.: Design of ITER vacuum vessel in-wall shielding. Fusion Eng. Des. 89(7–8), 1814–1819 (2014)CrossRef

17.

Sukegawa, A.M., et al.: Safety design of radiation shielding for JT-60SA. Fusion Eng. Des. 82(15–24), 2799–2804 (2007)CrossRef

18.

Villari, R., et al.: Nuclear design of divertor tokamak test (DTT) facility. Fusion Eng. Des. 155, 111551 (2020)CrossRef

19.

Delmas, E., et al.: First boundary electrical feedthroughs for the heating neutral beams injectors of ITER. Fusion Eng. Des. 98, 1461–1464 (2015)CrossRef

20.

Glugla, M., et al.: The ITER tritium systems. Fusion Eng. Des. 82(5–14), 472–487 (2007)CrossRef

21.

Noh, C.H., et al.: Final design of ITER vacuum vessel thermal shield. Fusion Eng. Des. 88(9–10), 1896–1899 (2013)CrossRef

22.

Shi, S., Wu, H., Song, Y., Handroos, H.: Solid lubrication with MoS2-Ti-C films for high-vacuum applications in a nuclear fusion experimental device. In: Industrial Lubrication and Tribology (2018)

23.

Kobayashi, T., et al.: Progress in development and fabrication of the JT-60SA ECH/CD system (No. IAEA-CN--258) (2018)

24.

Takeda, N., Kakudate, S., Nakahira, M., Shibanuma, K.: Performance test of diamond-like carbon films for lubricating ITER blanket maintenance equipment under GPa-level high contact stress. Plasma Fusion Res. 2, 052 (2007)CrossRef

25.

ASTM International, ASTM G40–15, Standard Terminology Relating to Wear and Erosion, ASTM International, West Conshohocken, PA (2015)

26.

Rogers, S.R., et al.: The interaction of galling and oxidation in 316L stainless steel. Wear 450, 203234 (2020)CrossRef

27.

Koizumi, K., et al.: Design and development of the ITER vacuum vessel. Fusion Eng. Des. 41(1–4), 299–304 (1998)CrossRef

28.

Caixas, J., et al.: Weld distortion prediction of the ITER vacuum vessel using finite element simulations. Fusion Eng. Des. 88(9–10), 2011–2014 (2013)CrossRef

29.

Capriccioli, A., Frosi, P.: Multipurpose ANSYS FE procedure for welding processes simulation. Fusion Eng. Des. 84(2–6), 546–553 (2009)CrossRef

30.

Afcen, R.M.: Design and construction rules for mechanical components of nuclear installations (2007)

31.

Baxi, C.B., Wong, C.P.C.: Review of helium cooling for fusion reactor applications. Fusion Eng. Des. 51, 319–324 (2000)CrossRef

32.

Dalla Palma, M., et al.: The beamline for the ITER heating neutral beam injectors: a case study for development and procurement of high heat flux components. Fusion Eng. Des. 171, 112559 (2021)CrossRef

33.

Han, X., Ziying, L.: Design and analysis of the thermal shield of EAST tokamak. Plasma Sci. Technol 10(2), 227 (2008)CrossRef

34.

Barone, G., Roccella, S., Martelli, E., Visca, E.: DTT thermal shield: preliminary thermal analysis. Fusion Eng. Des. 158, 111725 (2020)CrossRef

35.

Chung, W., et al.: A study on the thermal analyses of the ITER vacuum vessel thermal shield. Fusion Eng. Des. 83(10–12), 1588–1593 (2008)CrossRef

36.

Nam, K., et al.: Progress of detailed design and supporting analysis of ITER thermal shield. Fusion Eng. Des. 85(10–12), 1866–1874 (2010)CrossRef

37.

Noel, R.: The new code “RCC-MR”—rules for design and construction of LMFBR components. Nucl. Eng. Des. 98(3), 297–303 (1987)CrossRef

38.

Marie, S., Drubay, B., Berton, M.N., Gelineau, O., Escaravage, C., Bonne, D., Sperandio, M.: Presentation of RCC-MR code 2007 for high temperature reactor and ITER projects: general overview. In: ASME Pressure Vessels and Piping Conference, vol. 43642, pp. 771–777 (2009)

39.

Lebarbe, T., Marie, S., Drubay, B., Gelineau, O., Bonne, D., De La Burgade, F.: Presentation of the Afcen RCC-MRx code for sodium reactors (SFR), research reactors (RR) and fusion (ITER): general overview. In: Pressure Vessels and Piping Conference, vol. 49200, pp. 797–802 (2010)

40.

SDC-IC, I. T. E. R. Structural design criteria for ITER in-vessel components. ITER Document, (G74) (2004)

41.

Code, A.S.M.E.: American society of mechanical engineers boiler and pressure vessel code. Appendix G Part 12, 123–132 (1980)

42.

Zagrajek, T., Marek, P., Krzesiński, G., Bachmann, C., Mozzillo, R.: Design and verification of a non-self-supported cryostat for the DEMO tokamak. Fusion Eng. Des. 161, 111964 (2020)CrossRef

43.

Jones, L., et al.: European preparations for the ITER VV sectors manufacture. Fusion Eng. Des. 86(9–11), 2096–2100 (2011)CrossRef

44.

Ioki, K., et al.: ITER vacuum vessel: design review and start of procurement process. Fusion Eng. Des. 84(2–6), 229–235 (2009)CrossRef

Titel: From Design to Procurement of Tokamak Mechanical Structures
verfasst von: Andrea Zoppoli
Mauro Dalla Palma
Giuseppe Di Gironimo
Verlag: Springer Nature Switzerland
Buch: Design Tools and Methods in Industrial Engineering III
Print ISBN: 978-3-031-58093-2

Electronic ISBN: 978-3-031-58094-9

Copyright-Jahr: 2024
DOI: https://doi.org/10.1007/978-3-031-58094-9_29

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht