nach oben

Metallography, Microstructure, and Analysis

13.05.2024 | Original Research Article

Effect of Aging Heat Treatment on Microstructure and Properties of Al–Cu–Mg Alloy

verfasst von: Mitushi Agrawal, Gaurav Mittal, Nikunj Patel, Ajaya Kumar Pradhan

Erschienen in: Metallography, Microstructure, and Analysis

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The research investigates the impact of aging heat treatment on the microstructure and properties of an Al–Cu–Mg alloy. A series of controlled aging experiments examined the alloy’s microstructure using advanced microscopy techniques, including optical microscopy, scanning electron microscopy, and X-ray diffraction (XRD). Furthermore, mechanical properties such as hardness and compressive strength were evaluated to quantify the alloy’s response to aging. The relationship between the observed microstructural modifications and the resulting mechanical properties is discussed, shedding light on optimizing aging heat treatment. This study contributes to a deeper understanding of the interplay between microstructure and properties in metal alloys, facilitating the design and development of materials with tailored mechanical behavior.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

F. Shen, W. Li, Z. Sun, Z. Zhou, C. Xie, Z. Liao, D. Yi, Insights of texture and microstructure evolution in the short time annealing of Al–Cu–Mg alloy at large temperature range. J. Alloys Compd. 871, 159613 (2021). https://doi.org/10.1016/j.jallcom.2021.159613CrossRef

N. Patel, M. Joshi, A. Singh, A.K. Pradhan, Effect of solution heat treatment on microstructure and some properties of Al–Cu–Mg alloy. Trans. Indian Inst. Met. 76, 2681–2689 (2023). https://doi.org/10.1007/s12666-023-02961-xCrossRef

N. Patel, S. Manani, A.K. Pradhan, Effect of addition of Cu on microstructure and some properties of 5754 aluminum alloy. Trans. Indian Inst. Met. 76, 1929–1936 (2023). https://doi.org/10.1007/s12666-023-02904-6CrossRef

N. Patel, M. Joshi, A. Singh, G.N. Mittal, M. Agrawal, S. Manani, A.K. Pradhan, Effect of solution heat treatment (temperature and time) on microstructure and properties of Al–Cu–Mg alloy. Int. J. Met. (2023). https://doi.org/10.1007/s40962-023-01095-6CrossRef

T. Huang, F. Liu, Z. Liu, G. He, Evolution of microstructure, texture, and hardness in an Al–Cu–Mg alloy during annealing. J. Mater. Eng. Perform. 31, 1419–1431 (2022). https://doi.org/10.1007/s11665-021-06265-3CrossRef

A. Alil, M. Popović, T. Radetić, M. Zrilić, E. Romhanji, Influence of annealing temperature on the baking response and corrosion properties of an Al–4.6 wt% Mg alloy with 0.54 wt% Cu. J. Alloys Compd. 625, 76–84 (2015). https://doi.org/10.1016/j.jallcom.2014.11.063CrossRef

F. Shen, Z. Zhou, W. Li, Z. Sun, J. Tian, C. Xie, J. Guo, Z. Liao, D. Yi, J. Zhang, H. Wang, B. Jiang, Micro-mechanism of texture evolution during isochronal annealing of as-annealed hot rolled Al–Cu–Mg sheet. Mater. Des. 165, 107575 (2019). https://doi.org/10.1016/j.matdes.2018.107575CrossRef

M. Agilan, G. Phanikumar, D. Sivakumar, Weld solidification cracking behaviour of AA2195 Al–Cu–Li alloy. Trans. Indian Inst. Met. 71, 2667–2670 (2018). https://doi.org/10.1007/s12666-018-1425-6CrossRef

A.K. Birru, D.B. Karunakar, M.M. Mahapatra, A study on hot tearing susceptibility of Al–Cu, Al–Mg, and Al–Zn alloys. Trans. Indian Inst. Met. 65, 97–105 (2012). https://doi.org/10.1007/s12666-011-0112-7CrossRef

10.

M. Zamani, S. Toschi, A. Morri, L. Ceschini, S. Seifeddine, Optimisation of heat treatment of Al–Cu–(Mg–Ag) cast alloys. J. Therm. Anal. Calorim. 139, 3427–3440 (2020). https://doi.org/10.1007/s10973-019-08702-xCrossRef

11.

N. Chobaut, D. Carron, J.-M. Drezet, Characterisation of precipitation upon cooling of an AA2618 Al–Cu–Mg alloy. J. Alloys Compd. 654, 56–62 (2016). https://doi.org/10.1016/j.jallcom.2015.09.113CrossRef

12.

J.-H. Jang, D.-G. Nam, Y.-H. Park, I.-M. Park, Effect of solution treatment and artificial aging on microstructure and mechanical properties of Al–Cu alloy. Trans. Nonferrous Met. Soc. China. 23, 631–635 (2013). https://doi.org/10.1016/S1003-6326(13)62509-1CrossRef

13.

İ Özbek, A study on the re-solution heat treatment of AA 2618 aluminum alloy. Mater Charact. 58, 312–317 (2007). https://doi.org/10.1016/j.matchar.2006.07.002CrossRef

14.

I. Zuiko, R. Kaibyshev, Aging behavior of an Al–Cu–Mg alloy. J. Alloys Compd. 759, 108–119 (2018). https://doi.org/10.1016/j.jallcom.2018.05.053CrossRef

15.

I.S. Zuiko, M.R. Gazizov, R.O. Kaibyshev, Effect of thermomechanical treatment on the microstructure, phase composition, and mechanical properties of Al–Cu–Mn–Mg–Zr alloy. Phys. Met. Metallogr. 117, 906–919 (2016). https://doi.org/10.1134/S0031918X16090088CrossRef

16.

G. Bo, F. Jiang, H. Su, L. Wu, J. Teng, D. Fu, H. Zhang, Static softening behavior and modeling of an Al–Cu–Mg–Zr alloy with various pre-precipitation microstructures during multistage hot deformation. Mater. Sci. Eng. A. 778, 139094 (2020). https://doi.org/10.1016/j.msea.2020.139094CrossRef

17.

N. Patel, S. Manani, A.K. Pradhan, Influence of copper addition on microstructure, mechanical and thermal properties of Al–12.6%Zn–Mg alloys. Int. J. Met. (2023). https://doi.org/10.1007/s40962-023-01202-7CrossRef

18.

N. Patel, A.K. Pradhan, Influence of copper addition on microstructure, mechanical and thermal properties of Al-Zn-Mg alloys. Int. J. Met. (2023). https://doi.org/10.1007/s40962-023-01214-3CrossRef

19.

N. Patel, A.K. Pradhan, Mechanical properties, thermal properties and microstructure of heat-treated Al-Zn-Mg-x%Cu (0.02 wt% Cu and 0.89 wt% Cu) alloy. Int. J. Met. (2024). https://doi.org/10.1007/s40962-023-01232-1CrossRef

20.

M.F. Ibrahim, A.M. Samuel, F.H. Samuel, A preliminary study on optimizing the heat treatment of high strength Al–Cu–Mg–Zn alloys. Mater. Des. 57, 342–350 (2014). https://doi.org/10.1016/j.matdes.2013.11.078CrossRef

21.

N. Nafsin, H. Rashed, Effects of copper and magnesium on microstructure and hardness of Al–Cu–Mg alloys. Int. J. Eng. Adv. Technol. IJEAT. 2, 533–536 (2013)

22.

O. Engler, C.D. Marioara, T. Hentschel, H.-J. Brinkman, Influence of copper additions on materials properties and corrosion behaviour of Al–Mg alloy sheet. J. Alloys Compd. 710, 650–662 (2017). https://doi.org/10.1016/j.jallcom.2017.03.298CrossRef

Titel: Effect of Aging Heat Treatment on Microstructure and Properties of Al–Cu–Mg Alloy
verfasst von: Mitushi Agrawal
Gaurav Mittal
Nikunj Patel
Ajaya Kumar Pradhan
Publikationsdatum: 13.05.2024
Verlag: Springer US
Erschienen in: Metallography, Microstructure, and Analysis
Print ISSN: 2192-9262
Elektronische ISSN: 2192-9270
DOI: https://doi.org/10.1007/s13632-024-01076-z

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht